Christmas notice: orders may experience delays.

12 of 51 products
12
Position
MB14
NKE

MB14

  • Inner Ø
    70 mm / 2.756 in
  • Outer Ø
    98 mm / 3.858 in
  • Width
    1.5 mm / 0.059 in
  • Weight
    0.03 kg / 0.07 lb
MB19
NKE

MB19

  • Inner Ø
    95 mm / 3.74 in
  • Outer Ø
    133 mm / 5.236 in
  • Width
    1.75 mm / 0.069 in
  • Weight
    0.06 kg / 0.13 lb
MB56
NKE

MB56

  • Inner Ø
    280 mm / 11.024 in
  • Outer Ø
    362 mm / 14.252 in
  • Width
    3 mm / 0.118 in
  • Weight
    0.7 kg / 1.54 lb
MB6
NKE

MB6

  • Inner Ø
    30 mm / 1.181 in
  • Outer Ø
    49 mm / 1.929 in
  • Width
    1.25 mm / 0.049 in
  • Weight
    0.008 kg / 0.02 lb
MB23
NKE

MB23

  • Inner Ø
    115 mm / 4.528 in
  • Outer Ø
    159 mm / 6.26 in
  • Width
    2 mm / 0.079 in
  • Weight
    0.1 kg / 0.22 lb
MB20
NKE

MB20

  • Inner Ø
    100 mm / 3.937 in
  • Outer Ø
    142 mm / 5.591 in
  • Width
    1.75 mm / 0.069 in
  • Weight
    0.07 kg / 0.15 lb
MB3
NKE

MB3

  • Inner Ø
    17 mm / 0.669 in
  • Outer Ø
    32 mm / 1.26 in
  • Width
    1 mm / 0.039 in
  • Weight
    0.003 kg / 0.01 lb
MB48
NKE

MB48

  • Inner Ø
    240 mm / 9.449 in
  • Outer Ø
    312 mm / 12.283 in
  • Width
    3 mm / 0.118 in
  • Weight
    0.45 kg / 0.99 lb
MB5
NKE

MB5

  • Inner Ø
    25 mm / 0.984 in
  • Outer Ø
    42 mm / 1.654 in
  • Width
    1.25 mm / 0.049 in
  • Weight
    0.01 kg / 0.02 lb
MB7
NKE

MB7

  • Inner Ø
    35 mm / 1.378 in
  • Outer Ø
    57 mm / 2.244 in
  • Width
    1.25 mm / 0.049 in
  • Weight
    0.01 kg / 0.02 lb
MBL30
NKE

MBL30

  • Inner Ø
    150 mm / 5.906 in
  • Outer Ø
    188 mm / 7.402 in
  • Width
    2 mm / 0.079 in
  • Weight
    0.11 kg / 0.24 lb
MB17
NKE

MB17

  • Inner Ø
    85 mm / 3.346 in
  • Outer Ø
    119 mm / 4.685 in
  • Width
    1.75 mm / 0.069 in
  • Weight
    0.05 kg / 0.11 lb
12 of 51 products
12
Position

Locking washer

A locking washer is a thin, split ring typically made from spring steel. Its contoured edges engage with corresponding notches on the shaft and bearing housing, creating a frictional force that prevents the bearing from rotating axially (slipping along the shaft).

NKE Locking Washers function by creating a positive lock between the bearing outer ring, shaft, and housing. The washer's split design allows for placement around the shaft, and its contoured edges engage with notches on the shaft and housing. As the nut or sleeve is tightened, the washer deforms slightly, creating a clamping force that secures the bearing in its axial position. This prevents the bearing from axial movement, maintaining proper bearing pre-load and ensuring 

overlay